Specifications General Frequency range: 100 kHz to 230 MHz Frequency resolution: 1 Hz Frequency stability: ? 30 ppm Sine wave output RF Connector: MCX socket Output power: approx. -10 dBm (0.1mW, 70.7mV rms) into a 50-ohm load Sweep time (Scalar Chart/Smith Chart/Field Mode): 3 seconds (Normal/fast sampling), 5 seconds (Double/slow sampling), 1.5 seconds (Normal/low resolution) Sweep time (FDR): 6 seconds Frequency Resolution: 258 points per sweep (258 to 10000 in deep sweep mode) Return loss dynamic range: 0 to -60 dB VSWR dynamic range: 100:1 maximum Impedance reading in open circuit: 60000 (@1 MHz) Measurement limits: |Z| < 100K, |R| < 100K, |X| < 100K, |Rho| < 0.98, C < 100 nF, L < 100 mH, -180 < ? < 180 Measured Parameters Complex impedance (series and parallel) and reflection coefficient in rectangular and polar form, VSWR, return loss, reflection power percentage, quality factor, equivalent capacitance, equivalent inductance Operating Modes Scalar Chart, Smith Chart, Single Frequency, Cable Test (TDR), Field, Multi-band, Signal Generator, Computer Control and Band Scan Features Common To Most Modes Presets for amateur radio bands Adjustable reference impedance Save to disk and recall functions Three available fixed scale options and automatic scaling Presets for popular coaxial cables Add/subtract transmission line Black or white color schemes Adjustable plot trace widths Scalar Chart Mode Graphical plot of two user-selected parameters in a rectangular chart Two markers with manual or automatic positioning Display detailed parameters for center frequency or any of the two marker positions Smith Chart Mode Plots complex reflection coefficient in Smith Chart form Two markers with manual or automatic positioning Display detailed parameters for center frequency or either of the two marker positions Single Frequency Mode Display all parameters for a single frequency Graphical representation of series and parallel impedance equivalent VSWR Audio feedback Circuit models and automatic LC matching network calculator Cable Test Mode Range: about from 2 to 250 m Displays step and impulse responses Field Mode Graphical plot of one user-selected parameter in a scalar chart with enhanced legibility Display max and min values Multi-band Mode Display rectangular charts for four bands simultaneously Signal Generator Mode Frequency range: 1 kHz to 230 MHz Programmable output level from -73 dBm to -10 dBm into a 50-ohm load Continuous, frequency sweep, AM and FM modulation modes Linear, logarithmic, bi-linear, and bi-logarithmic sweep modes Markers Tracking modes: Peak Min, Peak Max, Absolute Min, Absolute Max , Value Cross Any, Value Cross Up, Value Cross Down Interface Full color 3” TFT LCD 400 x 240 pixels 4 dedicated buttons 2 navigation keys PC Interface USB Mini-B receptacle USB 2.0 Full Speed Composite Device: Mass Storage Class (internal disk) HID Class (Computer Control mode) Storage 2 MB internal disk FAT compatible USB Mass Storage Screenshot save and recall feature Measurement data save and recall feature Possibility of files with user definable frequency presets, scale settings, and three custom cable types Measurement data files compatible with SARK Plots and ZPLOTS programs Calibration Automated Open/Short/Load calibration with up to eight stored profiles 400 calibration points Frequency calibration Measurement Architecture Single conversion superheterodyne Two independent measurement channels for simultaneous voltage and current measurement for precise phase measurement Two synchronized 12-bit analog to digital converters Processor 72 MHz STM32 MCU with 256KB Flash and 48KB SRAM Power 3.7V 1000mAh Internal Lithium-Polymer battery USB for operation and charging Automatic Power Off functionality (disabled, 5, 10, or 30minutes) Autonomy: approx. 2.5 hours Charge time: approx. 3.5 hours Environment Operating temperature: 0?C to 50?C Dimensions 98 * 60 * 14.5 (mm) Weight 120g Package Content SARK-110 x 1 with built-in battery MCX to SMA female connector adapter x 1 SMA plug to SMA female 8” (20-cm) cable adapter x 1
