LP-500 Digital Station Monitor Digital Watt/SWR Meter, Waveform Monitor Scope and Spectrum Analyzer all in one. Preliminary Info The LP-500 will only be offered assembled. Initial coupler offerings will be 3KW HF/6m, 5KW HF/6m, 5KW HF & 10KW HF couplers. A 1500W VHF coupler is in the works. The following pictures do not necessarily show the highest resolution display options for each mode. Important notice for LP-100(A) owners… LP-500 WILL NOT replace the LP-100A. The LP-100A will continue to be our main product with some important features not provided in the LP-500. The LP-100A couplers are similar but not identical to the LP-500 couplers, and are therefore not interchangeable. The LP-500 VHF / UHF couplers will not work with the LP-100A, but a version of the VHF coupler is being developed for the LP-100A. General* Bright, High Resolution Color TFT Display* 16-bit DSP Processor * USB Interface (not needed for normal operation)* Flash Upgradeable * Fast Screen Refresh * 12VDC Operation * Interface to Rig is Through Remotable RF Couplers Which Connect to the Rig / Amp Output * Provides Everything You Need to Know About the Quality of Your Transmissions * Size: 7.25″ W x 4.0″ H x 6.0″ D Watt / SWR Meter * Couplers for HF, VHF, UHF, Power up to 10KW * Frequency counter for band indexed calibration * Up to 4 Channels with Simultaneous Sampling & Auto-Ranging * NIST Traceable Calibration * Simultaneous Bargraphs for Peak Pwr, Average Pwr & SWR * SWR & Power Alarms w/ Adjustable Set Points * Readouts for Ref Power, Compression Ratio & dBm Waveform Monitor Scope * Adjustable Sweep & Trigger * Multiple Trace Display Options * Presets for SSB, CW, PSK & User Selections * Auto-Ranging * Trapezoid Linearity Display (Requires two couplers) Spectrum Analyzer * Displays Modulation Spectrum of Transmitted Signal * Adjustable Span & Averaging * Two Tone Generator * IMD Readout for Two Tone SSB, PSK Multi Display * Displays Up To 4 Couplers Simultaneously * Bargraphs for Peak Pwr, Average Pwr & SWR * Numerical Readouts for the Above Parameters * Displays Gain Between Any 2 Channels Waveform Mode – PSK Signal Rear Panel Power/SWR Display Waveform Monitor Mode – CW Signal Spectrum Display Multi Display
